Model 4100
|
 |

|
Wire connection clamps included |
|
Model No. |
Terminals |
Voltage
AC/DC |
Amp
Rating
@500VAC |
Max.
Freq.
MHz |
Contact
Resistance |
Max.
RPM |
Temp
Max. F (C) /
Min. F (C) |
Rotation
Torque (gm-cm) |
Circuit
Separation |
4100 |
4 |
0-500 |
3@100,1@60 |
100 |
<1m
|
 |
|
100 |
160(70) /-20(-29) |
2500 |
>50M
|
 |
|
Connector housing material is anodized aluminum
|
Model 4100 Standard Wire Connections |
Model 4100 Accessories |
 |
 |
41080
Grounding Collar w/ screw
(qty 2 included) |
41081
Tab Clamp w/ screws
(qty 6 included) |
|
|
Model 4100 Suggested Mounting Methods |
Model 4100 is typically mounted by the black anodized aluminum body using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates. For vertical orientation with the rotating member above, mount to the model 4100 top (gray) plastic bushing. |
|
Typical Body Mount Hole Dimensions
|
MODEL |
HOLE DIAMETER (Ø) * |
DEPTH |
4100 |
2.365" (60.07) |
3.00" (76.2) |
|
|
|
Typical Vertical Top Bushing Mount Hole Dimensions
|
4100 |
2.365" (60.07) |
2.50" (63.5) |
*Inch (mm) Tolerance Ø |
+.001" (+.025) |
|
|
|
-.000" (-.000) |
|
|
|
|
Installation Notes:
- the up arrow should not point below horizontal
- do not solder to or bend connector tabs
- avoid lateral forces and mechanical loads (overly stiff or tight wires)
- do not rigid mount both ends of connector
- limit mounting eccentricity (runout / wobble) to .005" (.13mm)
- provide overload protection within the circuit
- avoid vibration and bumping motions
|