Progressive International

Model 335


Disconnects included (6 lg.) Boot Kit available Available with stainless steel ball bearing (335-SS)


Model No.	Terminals	Voltage AC/DC	Amp Rating @500VAC	Max. Freq. MHz	Contact Resistance	Max. RPM	Temp Max. F (C) / Min. F (C)	Rotation Torque (gm-cm)	Circuit Separation

335

0-500

100

<1m

500

140 (60) /-20(-29)

700

>50M

335-SS

0-500

100

<1m

500

140 (60) /-20(-29)

700

>50M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Model 335 Accessories


57335 Boot Kit for dust or splash protection IP51	55250 Terminal 16 - 14 AWG (qty. 3 included)	55251 Terminal 16 - 14 AWG (qty. 3 included)

Terminals for other wire gauges available. (22-18 AWG and 12-10 AWG)

Model 335 Standard Wire Connections

Model 335 Wire Connections With Optional Boot

Model 335 Suggested Mounting Methods

Model 335 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions
MODEL		HOLE DIAMETER (Ø) *	DEPTH
335, et al		1.575" (40.0)	.80" (20.3)

Typical Bushing Mount Hole Dimensions
335, et al		.984" (25.0)	.80" (20.3)
*Inch (mm) Tolerance Ø	+.001" (+.025)
	-.000" (-.000)

Installation Notes:

the up arrow should not point below horizontal
do not solder to or bend connector tabs
avoid lateral forces and mechanical loads (overly stiff or tight wires)
do not rigid mount both ends of connector
limit mounting eccentricity (runout / wobble) to .005" (.13mm)
provide overload protection within the circuit
avoid vibration and bumping motions